TRIODE EQ3-SE tube Reference Phono Stage 2xMC 1xMM inputs 2xRCA 2xXLR outputs
Tri brings out the joy, beauty & dynamics of music that will have you listening into the wee small hours. NEW REFERENCE series MM / MC phono stage with2x separate MC stages.
1x MM stage
2x MC stages with separate low and high options.
Low Cut FilterFitted with ultra high end German Mundorf Capacitors and Japanies KOA Resistors.
All operations can be input on the front panel which is equipped with three lines. Operation of the left front MM, MC1, .
The rear panel also measures the Earth around the reinforcement required to play dual analog equipped with a large ground terminal.
Features
Specifications
Analog disc playing has deeply improved on the present popular digital audio sources, and now along combined is an individual phono amp seeking more of a sound quality.Therefore the functions sought in the previous phono amp is consolidated to the signal source selection and volume adjustment.
Low noise design:
In the rectification circuit of the amplifier, rectification tubes without switching noise in principle and luxurious
rectification circuit with choke transformer are used.
Simple signal transfer:
The amplifier minimizes the functions only needed for this amplifier, and the pureness of signals is secured by not passing through any unnecessary points.
Special Features of MC transformer:
High stepup efficiency with low loss, reducing a half of transmission loss / Super-perm-alloy gigantic EI core winding / low-loss big copper wire / High linearity in low range / Energetic sound in all ranges supported by carefully-selected materials / Good rise characteristics minimize a phase distortion in audible bandwidgh and clarify / the great sound image / Energetic, lively music reproduction / The winding structure, uniquely devided into layers for wide bandwidth response and high rise time / Vibration and co-vibration-free body structure by the weighted iron chasiss
Reproduces realistic music with good S/N image
TRV-EQ3SE Specifications:
Circuit type: NF type phono equalizer
Total harmonic distortion: 0.1%
Frequency:-1d B (10Hz ~ 70kHz)
SN ratio: MM-90dB / MC-87dB
Channel separation:> 90dB
Rear curve deviation: ± 0.25dB (20-20,000 Hz)
Low-cut filter: 15H, 18dBoct.
Input Sensitivity:
MM-1.5mV
MC - Low 0.23mV
MC - High 0.19mV
Gain:
MM 42.5dB
MC - Low 58.7dB
MC - High 64.4dB )
Input load resistance:
MM 47kΩ
MC 2Ω-47Ω
Rated output voltage: 200mV
Input: 3 MM / MC1 / MC2
Terminal output: 2x RCA 2x XLR (hot unbalance No. 3)
Tubes: JJ manufactured - 4x ECC803S (12AX7)
Akira Akebono - 1x 5AR4
Resistors: high quality Japanese-made carbon resistor KOA
Capacitor: high quality German Mundorf
Power consumption: 15W
Size: 340W × 315D 185H
Weight: 10kg
