PSAudio P10 PowerPlant 9 NZ plugs 1500va Power Regenerator/Conditioner

PS 05 PC P10
NZ$ 8,995.00 ea (incl. GST)
PS Audio
New
"I have had the P10 for just over 2 weeks now, and from the moment that it was connected, I have been hugely impressed  it gives a significant strengthening and increased impact to the lower frequencies, the mono blocks also appear to be so much more relaxed and in control – compared to both the P5 (with the mono blocks connected thru the P5) and also compared to the mono blocks when they are connected directly to the wall sockets and the P5 only had the MSB gear and Aurender connected. Many thanks for giving the opportunity to upgrade to the P10, much appreciated."......David

The largest and most advanced high-end personal power generating station in the world.  Capable of powering any size system with pure sine wave power, no other product comes close to a P10′s ability to bring forth all that’s possible from your system and ensures you get the same great performance every time.

The P10 has 5 separate regenerated zones and 1500 watts of pure regenerated power.  From medium to large power amplifiers to the smallest pieces of source equipment, the P10 will work magic on your system’s performance.

Don’t starve your music.  A P10 gives you improved dynamics, far better bass and a much bigger, open sound stage.  

Note : "we have chosen a P10 to front our reference system, not ony to protect our significant investment but because by offering its pure sine wave etc the music quality is utlimately enhanced , the improvement is easily audible, and we know we are getting the best possible performace from all the componemts. ".......Terry (Audio Reference)

Give us a call and we can bring one to trial in your system today..

Regenerated power is what separates the Power Plants from power conditioners. The power that comes out of your home’s wall socket is unregulated, weak and prone to distortion.  Inserting a standard power conditioner only makes that situation worse.  Power Plants take the raw power from the wall, convert it to DC and then regenerate new power that’s regulated, distortion free and powerful.

Inside each Power Plant is a massive power amplifier that delivers the new and distortion free AC to your equipment.  The power amplifier is fed from a low distortion DSP based sine wave generator and controlled from the front panel touch screen of the Power Plant.  The internal power supply stores enough energy to allow the power amplifier inside the Power Plant to deliver massive amounts of energy to your equipment.  Peaks of more than 70 amps can be delivered when a typical home wall receptacle can only provide 15 amps.

MultiWave and CleanWave take the output of the Power Plant to a new level

One of the major advantages of generating new power from the old is the ability to also generate new waveforms that enhance the capabilities of the power feeding your equipment.

MultiWave extends the peak charging time of the sine wave so connected equipment has more energy storage and less power supply ripple.  Turning MultiWave on is like adding a larger capacitor bank to your connected equipment’s power supply.  The audible results are dramatic and produce a bigger soundstage that sounds far more natural than with simply a perfect sine wave.

CleanWave is another unique feature to the Power Plants and helps connected equipment demagnetize their transformers.  AC power is never quite symmetrical and the small asymmetry that occurs can magnetize connected power transformer.  Activating CleanWave from either the Power Plant remote control or front panel touch screen can remove this problem from connected transformers resulting in far cleaner audio.

The Power Plant’s output impedance is over 100 times lower than what your home’s power can provide

Low output impedance is critical to maintaining a dynamic and robust presentation.  Dynamic sags in the power line occur whenever your power hungry equipment demand power to drive your loudspeakers or projector causing noticeable degradation in the performance.  Placing anything in the path of the power, like a power conditioner, only worsens the problem.

A Power Plant, on the other hand, regulates the power and provides a constant output irregardless of the dynamic demands of power hungry equipment.  When your power amp is asked to produce loud orchestral levels you want to make sure it has all the power it needs.  Power Plants have such low output impedance that even the hungriest of amplifiers won’t be starved for clean AC power.  The results of feeding your equipment with low output impedance are dramatic:  unrestrained dynamic even under the loudest passages, open wide soundstage that does not collapse with volume and a naturalness to the music that is remarkable.

Power Plants have a separate high-current zone that soft starts even the biggest power amplifiers

Powering almost any size power amplifier is no problem for a modern Power Plant but some amplifiers are so large that they can trip your home’s circuit breaker just turning them on.  With a P5 or P10 Power Plant there’s no longer any need to worry.  Using the unique high current zone built into the Power Plant, even power amplifiers that might trip a home’s circuit breaker are soft started and power up as nice and politely as could be.

This soft start feature also helps prolong the life of connected equipment from large inrush currents needed to fill up empty power supply capacitors.

With thousands of Power Plants all over the world you can be assured we have one just right for your country

For over a decade we have been shipping Power Plants to power high-end systems all over the world.  Power Plants are available in multiple voltages and receptacle styles.  Chances are very good we have one just right for you.

Check with your country’s PS Audio dealer or distributor to learn about the details and what it takes to own the best power foundation in the world and start to enjoy all the benefits of having your own personal generator right in your home.

Complete control of everything from anywhere in the world

Using any web browser or mobile device from anywhere in the world, Power Plant owners can monitor their power, schedule equipment to turn on and off days, weeks or even months in advance.  Once connected to the internet the Power Plant communicates and reports its status to our servers automatically.

Owners can then go online and schedule events, check the status of the power line, the voltages and even receive email notifications if so desired.  Owners can also manage all the parameters available through the web interface, including switching zones on and off, setting up auto reboot area that will ping our servers to make sure internet connectivity is maintained and rebooting the device if not, plus a host of other interactive features and events.

Complete protection from any power line event

Owners who have invested in a Power Plant can rest assured their connected equipment will be safe from any power line event such as over voltage, under voltage, surges, spikes and potentially threatening problems.

The input voltage to the Power Plant is fully protected by state-of-the-art clamping devices and the output of the Power Plant is fully regulated so even large voltage swings that would normally damage connected equipment are made safe by either clamping or regulating.  In most cases, connected equipment enjoys the protection and performance benefits of fully regulated power, even under extreme circumstances.

In the event of a major surge or spike, the Power Plant will automatically remove power from all connected equipment and shut itself down.  When power is restored to normal, the Power Plant will safely turn all connected equipment back on in the sequence owners have set up for it.

Features

Testimonials

Features

1500VA output @ 230vac
9x NZ/AUD plugs 
(Note - it is ok to piggy back another plug on top of the other for an extra component provided plug load is not exceeded)
Built in Boulder
Passively cooled
100% regenerated AC
Integrated oscilloscope
THD meter
Control over the web or network
Adjustable output voltage
Colour touch screen

Testimonials

Many thanks for giving the opportunity to upgrade to the P10
Hi Terry,
I have had the P10 for just over 2 weeks now, and from the moment that it was connected, I have been hugely impressed.
 
It gives a significant strengthening and increased impact to the lower frequencies, the mono blocks also appear to be so much more relaxed and in control – compared to both the P5 (with the mono blocks connected thru the P5) and also compared to the mono blocks when they are connected directly to the wall sockets and the P5 only had the MSB gear and Aurender connected.
 
Many thanks for giving the opportunity to upgrade to the P10, much appreciated.

.... David

http://www.audioreference.co.nz/product/psaudio-p10-powerplant-9-nz-plugs-1500va-power-regeneratorconditioner