EAT LPS-Linear Power Supply 12v 2a / 18v 1.5a w power rectifier for turntables

ET 04 TA LPS
NZ$ 1,995.00 ea (incl. GST)
EAT Tubes

a better product for high requirements of exclusive audiophiles

New

Elegant power supply.
We at EAT strongly believe that power supply is a part of signal path and the quality of power supply extremely significantly contribute to the sound quality. It is done without any compromise. Full bridge rectifying use for ultra-fast diodes followed with 8800uF filtration bank. Voltage regulator is fully discrete. No operational amplifier is used. Voltage reference is TL431. This all result in very low noise and perfect regulation. In many aspects it also over-performing battery power supply. Ripple voltage is lower than 1 microvolt! Voltage accuracy is better than ±0,05%. The temperature drift is beyond every level of standard power supplies. LPS is Dedicated for EAT phono stages and turntables.

- Dual output
– Clean power supply
– Two separate power supplies in one!
– RFI eliminated from mains
– Elegant looks

Specifications

Specifications

Model: EAT LPS Linear Power Supply
Input Power supply: 120V or 230V AC
Output voltage / current: 1 × 15V/2A ±0,05%, noise max. 10uV
Output voltage / current: 1 × 18V/1.5A ±0,05%, noise max 1uV
Supplied cables:
1 × 15V 2.1mm (for EAT C-Sharp, EAT C-Major and all Pro-Ject turntables)
1 × 15V XLR 4Pin (for EAT E-Flat, EAT Forte S*)
1 × 18V 2.5mm (for EAT E-Glo S, EAT Forte* and all Pro-Ject Phono products except Phono Box RS and AD Box S2 Phono)
Dimensions 435W × 60H × 272D mm
Available in: Silver
Weight: 4900 g